The Optic and Video Collimator (2-in-1) is a small optic and video instrument able to visualize an image with superimposed a particular reticle for the calibration and the alignment of the axes.
The possibility to use the collimator both optically and in video through the 3.0Mpx USB microcamera extends the flexibility of use.
With the VIDEO VIEW light software it is possible to acquire, compare, save images, record films, etc.
The vision of the image with the enlarged subject and the cross overlapping with different concentric rings, allows to the mechanical industry to use this instruments to calibrate, to align axes, guides, carriages, chargers of bars and pipes for tool machines, etc.
The focus regulation is possible from a minimum distance of 50 cm to infinity.
|OPTIC COLLIMATOR TECHNICAL DATA
||Dimensions and weight
|Fitting cylinder of insert rod:
|Sleeve/borehole of telescope:
Telescope magnification (V): 6X
Entrance pupil (EP): 12 mm
Exit pupil (AP): 2 mm
Eye relief: 10 mm
Field of view angle: 7°
Field of view at 100 m: 12 m
Range adjustment: 0.5 m to infinite
Diopter setting, fixed: -0.5 dpt
Reticle pattern: see figure
3.0Mpx USB camera
VIDEO VIEW light software
Operative system: Windows XP; Windows Vista; Windows 7
CPU: Intel Pentium IV 2 GHz or compatible (recommended Intel Core i7, 2.3 GHz)
RAM memory: 2 GB (recommended 6 GB DDR3)
Video card: 512 MB dedicated (recommended 2 GB)
Disk space: 20 MB approx.
Input ports: 1 USB2.0 for video input;
1 USB2.0 for the software hardware key